Updated November 2026 · Will Brain, technical lead

Limewashed hempcrete block wall with lime mortar joints

LIMEWASH · INTERIOR AND EXTERIOR

Limewash Paint
Limewash for brick, block and plaster walls

Limewash Paint
Limewash for brick, block and plaster walls

Limewash Paint
Limewash for brick, block and plaster walls

A breathable lime finish, brushed or rolled on in two coats, inside and out.

Limewash is a traditional, breathable lime coating with a natural patina that ages with your building. Our limewash suits brick, block, plasterboard, off form concrete, stone and hempcrete walls. Limewash cost: $25 per m² of wall + GST, supply only, two coats.

SUPPLIED BY RESPIRABUILT

TWO COATS

By brush, roller or sheepskin mitt.

INSIDE AND OUT

Rated for interior and exterior use.

VERY LOW VOC

Rated very low VOC.

$25 PER M²

Of wall + GST, supply only, two coats.

Limewash, finished

Our limewash on a sample panel, from afar and close up

Lime wash paint sample from afar

From afar

Lime wash paint sample close up

Close up

Limewash on hempcrete blocks

what it is, and a limewashed hemp block wall at the Bega, NSW hemp house

Limewashed hempcrete block wall at the Bega, NSW hemp house

Limewashed hemp block, close up, at the Bega, NSW hemp house.

What it is

Limewash, often called limewash paint, is a simple lime-based finish that preserves the breathability of internal hempcrete RespiraBlocks. It gently fills the pores while celebrating the natural texture and character of the hempcrete, keeping the blockwork elegantly visible. Perfect for DIY applications, limewash offers an accessible alternative to full lime render with a timeless patina that evolves beautifully over time.

Key Features:

  • Breathable: Allows surfaces to breathe, improving indoor air quality.

  • Very low VOC.

  • DIY Friendly: Accessible hands-on application for owner-builders.

  • Tintable: Can be tinted to a range of light colours with alkali-resistant oxides. Some fading may occur.

  • Ages Beautifully: Develops natural patina and character over time.

We provide the takeoff and delivery of materials alongside your Respirabuilt order to bundle freight.

Limewash at the Bega hemp house

limewashed hemp block walls, during the build and finished

Limewashed hemp block wall with lime mortar joints at the Bega, NSW hemp house

Block wall, lime mortar joints

Limewashed hemp block wall and doorway during the build at the Bega, NSW hemp house

Doorway, during the build

Limewashed hemp block wall and doorway onto a timber-floored room at the Bega, NSW hemp house

Finished, with timber floors

Limewashed hemp block wall around a doorway with timber floors at the Bega, NSW hemp house

Finished, the same doorway

Limewash walls, inside and out

and how to apply it

INTERIOR AND EXTERIOR

Interior and exterior application on:

RespiraBlocks (interior)

RespiraDrywall

Brick and block

Plasterboard

Off form concrete

Stonework

APPLICATOR INFORMATION

How to apply

Apply with brush or roller in thin, even coats.

Allow each coat to dry before applying the next.

Multiple coats build depth and opacity.

Limewash on brick

preparation, primer and application

Yes, you can limewash brick. Brick and block, plasterboard, off form concrete and stonework as compatible surfaces, for interior and exterior use. It dries to a flat finish and develops a natural patina, so a limewashed brick wall looks soft and slightly varied rather than painted.

Brick needs preparation. The wall must be clean and free of dust, dirt, oil, salt, mould or any other contamination, and any base coats must be fully cured. Lime is highly alkaline. Prime with an anti-efflorescent primer to protect the surface underneath, and check with us before coating an existing finish.

Apply two coats by brush, roller or sheepskin mitt. One 15 litre drum typically covers 25 to 30 m². Keep it sheltered from rain for 24 to 48 hours afterwards, and don’t apply below 5°C or above 35°C. We recommend a skilled, experienced applicator. Limewash is not for areas of continual damp, areas submerged in water, or floors.

Ask us before you start on brick, and we will check it suits your wall.

Technical data

the figures, and where they come from

By the numbers

2 coats

by brush, roller or sheepskin mitt

25 to 30 m²

one 15 litre drum, typically

About 2 hours

touch dry

About 4 hours

ready to recoat

5°C to 35°C

apply only within this range

24 to 48 hours

keep it sheltered from rain afterwards

Source: limewash technical data sheet.

Technical datasheet (PDF)

Limewash questions

the ones people ask first

Is limewash the same as limewash paint?

Yes. Limewash, lime wash and limewash paint are the same thing.

Can I limewash interior walls?

Yes. It suits interior walls of brick and block, plasterboard, off form concrete, stonework and lime plasters. In our hempcrete system it goes straight onto RespiraBlock or RespiraDrywall, with no primer needed on hempcrete.

Can I use limewash outside?

Yes, it suits exterior walls too. On a hempcrete house our external system is Lime Plaster, and limewash goes over it as a top coat. Ask us if you want it on exterior brick.

How many coats of limewash?

Usually two. It is touch dry in about 2 hours and ready to recoat in about 4.

What colours can limewash be?

It is tinted with alkali-resistant oxides to a wide range of light base colours. Some fading may occur, depending on the pigment.

Is limewash breathable?

Yes. Limewash lets the wall breathe and can contribute to better indoor air quality. That is why it suits hempcrete: it goes straight onto RespiraBlock or RespiraDrywall with no primer.

Can you limewash over paint?

Ask us first. Lime is highly alkaline and can affect the coating underneath, so we check an existing paint or finish before it goes on. Bare brick takes an anti-efflorescent primer first; hempcrete needs none.

How long does limewash last?

Many years. It develops a natural patina that ages with your building, and because it lets the wall breathe, it does not peel the way modern paints do when moisture gets trapped behind them.

What is the difference between limewash and paint?

Limewash is made from lime. It dries flat, lets the wall breathe, is very low VOC, has natural anti-bacterial properties from its high alkalinity, and reabsorbs carbon dioxide from the air. Modern paints seal the surface, so moisture gets trapped behind them and they peel. Limewash looks soft and slightly varied rather than one flat painted colour.

Does limewash rub off?

No, it doesn’t.

Can I use limewash in a bathroom?

In the dry parts of a bathroom and in laundries, yes. Not in showers, splash zones or anywhere that stays damp: limewash is not suited to areas of continual damp, so tile those.

How much does limewash cost?

$25 per m² of wall plus GST, supply only, for two coats, on RespiraBlock or plasterboard. On brick, allow extra for an anti-efflorescent primer. Ask us for a quote for your wall.

Will Brain holding a hemp block in front of the hemp block wall at our Melbourne spec house

Talk to us about limewash

We supply limewash and provide the takeoff and delivery of materials alongside your Respirabuilt order to bundle freight. We host people for a coffee at our spec house in Richmond, Melbourne.