Updated November 2026 · Will Brain, technical lead

Canaposo hemp lime plaster on a hempcrete block, shown in two finishes

Senini’s note, in Italian

Canaposo a spugna · lamato

Canaposo a spugna · lamato

Canaposo: sponged, and trowelled.

SIGNATURE FINISH · INTERNAL

Canaposo
Hemp lime plaster for interior walls

Canaposo
Hemp lime plaster for interior walls

Canaposo
Hemp lime plaster for interior walls

Fine hemp in lime putty aged eighteen months. A smooth, breathable plaster, made in Italy.

Canaposo is a hemp lime plaster for interior walls: lime putty rested for eighteen months, blended with fine hemp powder and nothing synthetic, with no cement and no hydraulic binders. It goes on as a soft 2–3 mm skim, over a Venezia base on hempcrete or straight onto prepared plasterboard and Respira Drywall, and dries to a flat, softly speckled finish.

MADE IN ITALY BY SENINI · EXCLUSIVE TO RESPIRABUILT

AGED PUTTY

Senini’s lime putty rests a year and a half before it is used.

FELT, NOT SEEN

Hemp powder under 1 mm gives a soft speckle.

BREATHABLE

A vapour resistance factor of μ 4.5, measured.

NO HYDRAULIC BINDERS

Which is what keeps it so breathable.

Canaposo hemp plaster, finished

Four finished samples.

Canaposo hemp lime plaster on a white panel

White

Canaposo hemp lime plaster on a cream panel

Cream

Canaposo hemp lime plaster on a coral panel

Coral

Canaposo hemp lime plaster in mauve on a hempcrete block

Mauve

How this hemp plaster goes on

where it goes, and the build-up on each wall

INTERNAL

On hempcrete, plasterboard or Respira Drywall

Canaposo is a thin finishing plaster, so it always goes over a sound, even base. On a hempcrete wall that base is Venezia; on board walls it goes straight over a prepared surface. Either way it is steel-trowelled and sponge-floated to a smooth, flat finish.

On hempcrete (RespiraBlock)

5 mm of Venezia, then Canaposo in two coats to 2–3 mm, steel-trowelled and sponge-floated. Junctions are reinforced first.

On plasterboard and Respira Drywall

Two fine coats of Canaposo over a prepared base. A natural plaster finish without building a hempcrete wall.

A natural, breathable plaster

what’s in it, what it does for a room, and why it lasts

Lime-rendered houses along a narrow canal in Venice, with gondolas below

VENICE: CENTURIES OF LIME RENDER, STILL STANDING.

Photo: Jorge Franganillo, CC BY 2.0, via Wikimedia Commons

Totally natural

Three things go into this hemp plaster: lime putty aged eighteen months, fine hemp powder, and calcium carbonate or natural earths for colour. That is the whole recipe. No cement and no hydraulic binders.

A healthier room

The hemp and lime soak up moisture when a room is humid and give it back as it dries, which keeps the air comfortable and the wall dry. Senini describes it as desalinating and dehumidifying, a humidity regulator for new and old walls that “guarantees maximum healthiness” and noticeably improves living comfort.

Built to last

Lime is what Europe’s old buildings are rendered in, from Roman walls to Italian palazzi still standing centuries later. It keeps curing for years, slowly turning back into limestone as it takes in carbon dioxide from the air, and it stays slightly flexible, so it moves with the building instead of cracking.

Source: Senini, Canaposo technical data sheet (IT and EN).

Canaposo on hempcrete blocks

Senini’s sample blocks, with the note they wrote on each

Hempcrete block finished in Canaposo, trowelled and sponged, with a fine clay panel

Canaposo lamato · argilla fine · Canaposo spugna

Canaposo trowelled, fine clay, Canaposo sponged.

Hempcrete block with fine clay, red cocciopesto and trowelled Canaposo

Argilla fine int. · coccio rosso · Canaposo lamato

Fine clay (interior), red cocciopesto, Canaposo trowelled.

Hempcrete block with clay, cocciopesto and Canaposo

Argilla · coccio · Canaposo · argilla

Clay, cocciopesto, Canaposo, clay.

Hempcrete block with pressed Canaposo between sponged and pressed clay

Argilla a spugna e schiacciato · Canaposo schiacciato · Argilla fine

Clay sponged and pressed, Canaposo pressed, fine clay.

Colour

Any colour you like

Canaposo can be finished in any colour. There are two ways to get there.

1 · A natural oxide, sourced in Australia

Canaposo is tinted with a natural oxide sourced here, matched to the colour you want. The quicker route, with no wait on shipping.

2 · Senini’s signature colours, pre-mixed in Italy

Senini tints it with natural coloured earths at the factory, so it arrives ready-coloured in the bucket. Allow a four-month lead time from Italy.

Senini’s signature colours, as they appear on their own sample blocks:

Canaposo in its natural colour

naturale

Natural

Yellow earth pigment on a Senini sample block

terra gialla

Yellow earth

Cyprus umber earth pigment on a Senini sample block

terra ombra Cipro

Cyprus umber

Red earth pigment on a Senini sample block

terra rossa

Red earth

Red cocciopesto on a Senini sample block

coccio rosso

Red cocciopesto

Roman earth pigment on a Senini sample block

terra Roma

Roman earth

Colours as they appear on Senini’s own sample blocks, labelled in their hand. Shades vary with the dose and the light; we’ll match a colour to your project.

Canaposo and other interior plasters

how a hemp lime plaster compares

PLASTER

MADE FROM

BREATHABLE

WHERE

LOOK

Canaposo

Aged lime putty and fine hemp powder

Very (μ 4.5)

Interior walls

Smooth, matte, softly speckled

Clay plaster

Clay, sand and fibre

Very

Interior, dry areas

Matte, earthy

Tadelakt

Lime, polished and sealed with soap

Partly, once sealed

Interior, including wet areas

Polished, soft sheen

Polished (Venetian) plaster

Lime putty and marble dust, burnished

Partly, once waxed

Interior

Glossy, like polished stone

Gypsum set plaster

Gypsum

Less, and usually painted

Interior

Flat, needs paint

Canaposo

MADE FROM

Aged lime putty and fine hemp powder

BREATHABLE

Very (μ 4.5)

WHERE

Interior walls

LOOK

Smooth, matte, softly speckled

Clay plaster

MADE FROM

Clay, sand and fibre

BREATHABLE

Very

WHERE

Interior, dry areas

LOOK

Matte, earthy

Tadelakt

MADE FROM

Lime, polished and sealed with soap

BREATHABLE

Partly, once sealed

WHERE

Interior, including wet areas

LOOK

Polished, soft sheen

Polished (Venetian) plaster

MADE FROM

Lime putty and marble dust, burnished

BREATHABLE

Partly, once waxed

WHERE

Interior

LOOK

Glossy, like polished stone

Gypsum set plaster

MADE FROM

Gypsum

BREATHABLE

Less, and usually painted

WHERE

Interior

LOOK

Flat, needs paint

General comparison. For a render outside, see Lime Plaster; for a hemp render with visible shiv, see Venezia; for every finish, see Natural wall finishes.

Technical data

the figures, and where they come from

By the numbers

μ 4.5

vapour resistance factor

2–3 mm

applied thickness

1,110 kg/m³

bulk density

Internal

finish

≈ R 0.05

whole finish on hempcrete: 5 mm Venezia + 3 mm Canaposo

Thermal mass ≈ 7 kJ/m²K

heat the whole finish soaks up and releases, 5 mm Venezia + 3 mm Canaposo, about 5.8 kg on every square metre (est.)

R-values in m²K/W, worked out as thickness ÷ λ. Venezia’s λ 0.12 is Senini’s published figure. Senini publishes no λ for Canaposo, so its 3 mm skim is counted at about R 0.005, a typical figure for a lime finish of this density. The finish adds a little; the wall’s insulation comes from the hempcrete itself. Thermal mass: the finish weighs about 5.8 kg/m² (3 mm Canaposo at 1,110 kg/m³ plus 5 mm Venezia at 500 kg/m³). Senini publishes no specific heat, so heat storage is estimated with typical values for lime and hemp-lime (about 1,000 and 1,500 J/kgK). Like the R-value, it is a small share of the whole wall’s thermal mass.

A hygroscopic finish: it takes up moisture when a room is humid and gives it back as the air dries, evening out the swings.

Source: Senini, Canaposo technical data sheet (EN); Tecnocanapa catalogue, p. 15.

Technical datasheet (PDF)

Hemp plaster questions, answered

the ones specifiers ask first

What is hemp lime plaster?

A plaster made from lime and hemp instead of cement or gypsum. Canaposo is Senini’s hemp lime plaster: lime putty aged eighteen months with hemp powder under 1 mm, applied as a thin, breathable finishing coat on interior walls.

Can it go over plasterboard?

Yes. On plasterboard and Respira Drywall it goes on in two fine coats over a prepared base, so you can have a natural plaster finish without a hempcrete wall.

How is Canaposo different from Venezia?

Both are Senini hemp lime finishes. Venezia carries hemp shiv you can see; Canaposo uses fine hemp powder in an 18-month aged putty, for a smoother, softly speckled wall.

Can you see the hemp?

Only as a soft speckle. The hemp in Canaposo is a powder under 1 mm, so it colours the surface rather than standing out of it. For visible hemp shiv, look at Venezia.

Can it go on an external wall?

No. Canaposo is an internal finish. For external walls, our finishes are Canapulino and Lime Plaster.

What colours does it come in?

Any colour. Natural oxides can be added to finish it in the colour you want.

How is it supplied?

Ready to use, in 20 kg buckets. One bucket covers about 5 m² at 3 mm (Senini data sheet).

What can it go on?

Over a Venezia base on hempcrete (RespiraBlock), or in two fine coats over a prepared base on plasterboard and Respira Drywall.

Does it need sealing or painting?

No. Canaposo is coloured in the mix, so the plaster itself is the finished surface. If you ever want to paint over it, use a breathable mineral paint such as a lime or silicate paint, so the wall keeps breathing.

How long does it take to dry?

Like every lime putty plaster, it dries slowly and evenly. Each coat is left to firm up before the next, and fresh work is kept out of direct sun, frost and strong draughts. Your applicator sets the timing to the room and the weather.

Can lime plaster go mouldy?

Lime is naturally alkaline, which makes it a poor home for mould, and Canaposo’s breathability lets the wall dry out instead of trapping moisture. No finish can make up for a wall that stays wet, so leaks and rising damp still need fixing first.

What are the downsides?

It is an interior finish only, and it isn’t for showers or splash zones. It needs a sound, even base: Venezia on hempcrete, or properly prepared board. It is applied by hand by a skilled plasterer, and Senini’s pre-coloured versions take about four months to arrive from Italy.

Where can I buy Canaposo in Australia?

Canaposo is made in Italy by Senini and sold in Australia only by Respirabuilt. It comes ready to use in 20 kg buckets, tinted here with a natural oxide or pre-coloured by Senini (allow four months from Italy).

Will Brain holding a hemp block in front of the hemp block wall at our Melbourne spec house

Talk to us about Canaposo

Canaposo hemp lime plaster is exclusive to Respirabuilt in Australia. We host people for a coffee at our spec house in Richmond, Melbourne.